 |
 |
 |
 |
| The X-Fi Bravura 7.1 is a sound card designed for playing movies, music and gaming. Enjoy breathtaking audio for music and movies with DTS Neo:PC & DTS Interactive & when it's time to unwind with your favorite PC game, you won't be left behind with EAX 4.0. |
|
 |
 |
|
 |
 |
 |
 |
 |
Features
- The Auzen X-Fi Bravura 7.1 is another in a long line of Auzentech sound cards with real technological innovations, such as optimal design for analog audio, I/O Mode Control, independent headphone output circuitry for professional headphones, and Auzentech's proprietary Pointing Ground Power Supply (for audio that is free of power supply noise).
- The Auzen X-Fi Bravura 7.1 is designed for optimal
- audio output, both both digital and analog. The Creative X-Fi PCI
- Express Core Interface audio processor is on the back of the board
- while the analog circuitry is on the front, allowing for greater signal
- differentiation and better-performing analog circuit design.
- The Auzen X-Fi Bravura 7.1 uses 114dB Digital to
- Analogue Converters (DAC) with high quality metalized capacitors for
- the filter circuitry. The Operational Amplifiers (OPAMPs) for all
- channels are upgradable.
- With a maximum sampling rate of 24/192 kHz output,
- the Auzen X-Fi Bravura 7.1 is suitable for professional headphones. The
- proprietary headphone amplifier uses an independent 120dB DAC, an
- upgradable OPAMP, and film capacitors for the DAC filter. Auzentech's
- proprietary Pointing Ground Design shares one point for the DAC, OPAMP,
- Power supply and to the output jack, stopping noise from interfering
- with the signal, outputting a signal with much less distortion. In the
- Auzen X-Fi Bravura 7.1, the design has been improved over previous
- models for even greater output filtering and driving capacity.
- The X-Balance Pointing Ground Supply uses
- Conductive Polymer Capacitors with ten times the ESR rating than normal
- condenser capacitors and a superior instant power supply capacity.
- Features: Creative X-Fi native PCI Express audio processor.
- Supports 7.1 channel playback up to 24-bit/96kHz for speakers outputs.
- Supports stereo playback up to 24-bit/192kHz with 120dB DAC for Headphone output.
- All output OPAMPs are replaceable by end-user.
- Exclusive Hi-fi headphone amplifier for professional headphones with 1/4" phone jack.
- Stereo/Balanced mode microphone pre-amplifier for professional microphones.
- Premium quality audio pats including WIMA MKP, Nichicon ES and conductive polymer capacitors.
- I/O Mode Control, Pointing Ground Design, X-Balance Power Generation System; Optical/Coaxial combo connector for S/PDIF output.
- Intel HD Audio 10-1 pin front panel connector
- & DTS Neo. PC & DTS Interactive for Windows 7 and Vista.
- Supported operating systems for the Bravura's full features include
- Microsoft Windows 7, Windows Vista & Windows XP.
- Connectivity: Microphone
- Input: 3.5mm jack,
- selectable Microphone Pre-Amplifier Mode or Line Input Mode. Headphone
- Output: 6.35mm stereo phone jack.
- Speakers Output: Four 3.5mm stereo
- phone jacks for front, rear, centre/subwoofer & side.
- Digital
- Output
: RCA (Coaxial)/TOSLINK(Optical) Combo jack.
- Front Audio: Intel
- HD Audio 10-1 Pin connector. Extension: Multi S/PDIF I/O interface 8-1
- pin connector.
Package Contents: Auzen X-Fi BRAVURA 7.1 Audio Card,- Installation CD, Quick installation guide, Optical TOSLINK to TOSLINK
- cable (10 ft), Optical adaptor & 6.35mm Stereo phone adaptor plug.
- Note: Requires PCI-E slot.
|
|
 |
 |
 |
 |

|